P2104 obd2 code describes the tps actuator circuit

Shown here is the P2104 obd2 code and their general meaning and how to fix it quickly.

P2104 obd2 code

P2104 fault code means engine TP Actuator Cntl System

This obd2 code is very common on newer vehicles which contain new design of throttle positioner sensor. Instead of putting a tps sensor at the side of your throttle body as in older engines, a throttle actuator control system is installed which eliminates the mechanical linkage (cable) between the throttle body and the throttle pedal.

Under the throttle pedal, a throttle switch is installed and a throttle module or actuator is incorporated beside the throttle body. Because there is no mechanical device that wears out, it is more effecient in delivering better mileage and performance torque (besides...the actuator module performs better in getting all throttle signals to the ecm and trany).

To test this code, check the integrity of the wires going to both the throttle body actuator and the ecm including the throttle switch. Most of the time, if you have symptoms like trany going to a limp mode, the culprit originates from the trany circuit. However, if the symptom is engine related like hesitation, the problem resides in the throttle actuator itself which may sometimes includes the replacement of the whole throttle body assembly. Contact ATS if you need a wiring diagram or detailed fixes for your throttle actuator control system.

TIP:

Before replacing the throttle control actuator and throttle body, try cleaning the throttle plates and all plug-in wiring connections. Also, watch out the throttle body mounting bolts which can easily break (use care) when removing them.



Get UNLIMITED wiring diagrams for LIFETIME ATS membership good for 2 vehicles including ONE on ONE assistance 24/7 ONLY $49 (50% OFF), click on the LINK below:



More OBD2 Code Fixes

Copyright © 2016 ATS Certified Product